Payment & Shipping Terms:
|Control System:||PLC||Type:||Cold Rolling Mill|
|Thickness:||2-7MM||Voltage:||220v-380v-440v Or As Per Customer Request|
|Use:||Manufacture Grain Bin||Tile Type:||Steel|
Detachable Corrugated Side Silo Wall Panel Roll Forming Machine Manufacture Grain Bin
1. Large capacity
One single-silo capacity is up to 17,000 tons with comprehensive configurations to meet customers’ different requirements.
2. High accuracy
Complete advanced processing equipment and technology are introduced from USA to effectively ensure working accuracy and reduce damage to galvanized layer.
3. Less residues
External installable stiffeners contribute to less grain residues on silo walls.
4. Detachable and movable
With standardized and modularized production, components and parts have a high standardization and good interchangeability, thus can be partially replaced or completely transferred.
Material width adjusting and guiding equipment
Hydraulic control system
Decoiling →Guiding→Cutting→Roll forming→Curving equipment
|Suitable Raw Material||galvanized sheet, zinc aluminum sheet|
|Max. Feeding Width||1250mm|
|Diameter of Roller’s Shaft||120mm|
|Material of Roller||GCr15 quenching HRC 58-62°|
|Main Power||about 180KW|
|Electrical Control System||PLC frequency control|
|Power Supply||AC 440V & 50HZ & 3PH|
|Total Weight||approx 70T|
Basic parameters of finished product
1. Thickness of panel: 1mm zincalume sheeting G300.
2. Mechanical performance: yield strength 340MPa, tensile strength 470MPa.
3. coil width:900mm.
4. inner diameter of coil: φ460-550mm.
5. The width of finished profile width after formed: (As per required)
main configuration and technical proposal
(a) passive decoiler 10T
During normal processing, the decoiler works passively.
The capacity of this decoiler is around 10T, the width of coil is 900mm.
(b) Level system: Five-roller leveler.
1. The construction of roll-former: wall frame.
2. Transmission way: motor-chain drive-chain -main shaft
3. Roll-forming station: 18 stations
Contact Person: Karen